HP-UX (클러스터상태확인 등등~)

Install시 Ignite-UX11.11, GlancePlus설치

pvcreate -f

pvcreate -f /dev/rdsk/c4t0d0
pvcreate -f /dev/rdsk/c4t0d1
pvcreate -f /dev/rdsk/c4t0d2
pvcreate -f /dev/rdsk/c4t0d3
pvcreate -f /dev/rdsk/c4t0d4
pvcreate -f /dev/rdsk/c4t0d5
pvcreate -f /dev/rdsk/c4t0d6
pvcreate -f /dev/rdsk/c4t0d7
pvcreate -f /dev/rdsk/c4t1d0
pvcreate -f /dev/rdsk/c4t1d1

pvdisplay -v /dev/dsk/c1t15d0
pvdisplay -v /dev/dsk/c4t0d0

vgcreate vg01 /dev/dsk/c4t0d0

vgextend /dev/vg01 /dev/dsk/c4t0d1
vgextend /dev/vg01 /dev/dsk/c4t0d2
vgextend /dev/vg01 /dev/dsk/c4t0d3
vgextend /dev/vg01 /dev/dsk/c4t0d4
vgextend /dev/vg01 /dev/dsk/c4t0d5
vgextend /dev/vg01 /dev/dsk/c4t0d6
vgextend /dev/vg01 /dev/dsk/c4t0d7
vgextend /dev/vg01 /dev/dsk/c4t1d0
vgextend /dev/vg01 /dev/dsk/c4t1d1

lvcreate -L 138880 -n lvol01 vg01

newfs -F vxfs –o largefiles /dev/vg01/rlvol01
(라지 파일로 만들기)
fstyp -v /dev/vg01/lvol01

mount /dev/vg01/lvol01 /data

/etc/set_parms hostname SRVNAME

-------------------------------------------------------

sendmail disable

/sbin/init.d/sendmail stop

/etc/rc.config.d/mailservs

export SENDMAIL_SERVER=0
export SENDMAIL_SERVER_NAME=

-------------------------------------------------------

tar cvf - /tmp/ts2.bundle.txt | remsh ts01 "cd /zw; tar xf -"

rcp ts02:/etc/rc.config.d/netconf ./zw
-------------------------------------------------------

swinstall -s /aaa.depot

swinstall -s /cdrom

swcopy -?

-------------------------------------------------------

<<작업시 MCSG 내리고 올리고>>

cmviewcl            상태보기

/etc/cmcluster/pkg1/pkg1.cntl.log 로그 발생 모니터링하면서

cmhaltnode -f svr01                 active서버 내리면서 넘기고

cmviewcl         상태보고

[패키지 옮겨서 실행시키기]

cmrunpkg -n svr01 pkg1   (active로 노드 지정하기)
cmmodpkg -n svr01 -e pkg1           (active된쪽 패키지 실행시키기)

안되믄..

cmhaltcl -f       다시 원복하기 위해 클러스터링 전체 내리고
cmviewcl         상태보고

cmruncl -v       클러스터링 원복

-------------------------------------------------------

MCSG

ING

cmviewcl            상태보기

/etc/cmcluster/pkg1/pkg1.cntl.log 로그 발생 모니터링하면서

cmhaltnode -f gsmail01                 active서버 내리면서 넘기고

cmviewcl         상태보고

cmhaltcl -f       다시 원복하기 위해 클러스터링 전체 내리고
cmviewcl         상태보고
cmruncl -v       클러스터링 원복

[패키지 상태 보기]

cmviewcl [-v] [-l]

[패키지 살리기]

cmmodpkg -e [mail02] pkg1

[패키지 내리기]

cmhaltpkg pkg1

[패키지 옮겨서 실행시키기]

# cmhaltpkg pkg1             (active쪽 노드에서 패키지 내리기)
# cmrunpkg -n ftsys10 pkg1   (active로 노드 지정하기)
# cmmodpkg -e pkg1           (active된쪽 패키지 실행시키기)

혹은 (SE가 했던)

cmmodpkg -e pkg1
cmviewcl
cmhaltpkg pkg1
cmviewcl
cmmodpkg -e pkg1

혹은 (SE가 했던)

cmhaltpkg pkg1
cmviewcl
cmmodpkg -e -n gsmail02 pkg1
cmviewcl
cmrunpkg -n gsmail02 pkg1
cmviewcl
cmmodpkg -e pkg1
cmviewcl

[중지된 클러스터링 시작]

cmruncl -v (기존 구성된 전체 시작)

------------------------------------------------------

cmhaltcl -f

cmruncl -v

cmmodpkg -e pkg1

cmrunpkg -n gsmail01 pkg1

cmhaltnode -f gsmail01 pkg1

vi /etc/cmcluster/pkg1/pkg1.conf

    ---> vi /etc/cmcluster/pkg1/pkg1.conf 바꾸기

function customer_defined_run_cmds
{
# ADD customer defined run commands.
: # do nothing instruction, because a function must contain some command.

        /tims/script/START_1S.sh #살리는 쉘 추가
        test_return 51
}

# This function is a place holder for customer define functions.
# You should define all actions you want to happen here, before the service is
# halted.

function customer_defined_halt_cmds
{
# ADD customer defined halt commands.
: # do nothing instruction, because a function must contain some command.

        /tims/script/KILL_1S.sh #죽이는 쉘 추가
        test_return 52
}

-------------------------------------------------------------------------

umount 안되어 cluster 안넘어가는 시나리오시

*umount 안되어 cluster 안 넘어가는 시나리오
cmhaltnode -f mail01
(fuser 확인하고)
vgchange -a n vg01
umount /data
cmmodpkg -e -n mail02 pkg1
cmrunpkg -n mail02 pkg1

*mail01로 다시 돌려놓을때
cmhaltpkg -n mail02 pkg1 
cmmodpkg -e pkg1
cmviewcl

외장HDD shadow image만들기

fix01:/HORCM/scripts/서버명/서버명__hp_backup.sh

#################################################

superdome CPU 교체시

swlist -l fileset -a state | grep -i PH|more

parstatus

icod_stat

#################################################

HP 이상 점검

(1)#/var/adm/syslog/syslog.log

(2)#dmesg

(3)#/var/opt/resmon/log/event.log

(4)#체크쉘